1
Download netJACK Communication Module
Transcript
Mounting/Removing netJACK 44/154 Figure 1: Electrostatic Sensitive Device 6.2 Mounting Principle netJACK For mounting the netJACK communication modules, no tools are required. Simply insert the netJACK through the cut-out in the front panel of the housing of the host system, engage it to the carrier board, and finally lock it to the carrier board by using the sliding latch. Figure 2: Mounting Principle of the netJACK netJACK communication module Cut-out at front panel of the host system housing of host system Carrier board of host system Sliding latch netJACK Communication Module | Installation, Operation and Hardware Description DOC110504UM04EN | Revision 4 | English | 2013-12 | Released | Public © Hilscher, 2011 – 2013
