Download ANSYS ICEM CFD Tutorial Manual

Hexa Mesh Generation for a 2D Car
Figure 23: First Split
iv.
d.
Similarly, make one more vertical split at the front of the car through point PNTS/1.
Also, make two horizontal splits at the bottom and top of the vehicle (PNTS/12 and PNTS/5) as in
shown in Figure 24: First Block Splits at Car Extents (p. 38).
Figure 24: First Block Splits at Car Extents
4.
Split selected blocks using Index control.
By default, splits propagate only through the displayed blocks. By blanking blocks using Index control
values, the propagation of visible splits can be managed.
a.
Select Index Control.
Blocking
38
Index Control
ANSYS ICEM CFD 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.