Download User Manual

®
H04 / SCAMAX 510
3.
Scanning
The SCAMAX® 510 is designed to provide efficient processing of documents.
The following chapters describe the settings, both hardware and software,
which have to be made to ensure optimum paper flow.
The input hopper guides are set to comfortably accommodate the documents to
be scanned (see chapter 3.1).
The belts’ pressure can be adjusted by changing the steel paper weights
mounted on the feeder assembly. Various weights for paper input are supplied
with the scanner.
Use the PAPER THINNER / PAPER THICKER keys on the TSCP to change the
feeder settings (section 3.2).
The output hopper has to be adjusted to the paper size being scanned (section
3.4).
The ultrasonic double feed detector has four different settings for efficient
document processing (section 3.5).
If documents narrower than 140 mm are to be processed, it is recommended to
shift the transport belts to the inner tracks (section 3.6).
The scan background can optionally be changed to white to provide better
contrast when scanning transparencies or translucent paper (section 3.7).
After all settings have been made and sample documents have been placed in
the input hopper you can use the TEST RUN button to check the set-up
(section 5.8).
Instructions for the proper operation of the scan software and the scan PC can
be found in their respective manuals.
16