Download MF GROUP SpA - CIM

Transcript
PREMESSE
RETRY: In case of error if it is pressed the machine repeat the card.
ENTER: Execute the data.
F5: This key selects the operational mode of the inserting cycle. It is used for tests and there are
8 choices based on the combinations of the following 3 modes.
-
1.
2.
3.
4.
5.
6.
7.
8.
CONTINUOS: METAL EMBOSSER repeats the last processed card continuously.
WITHOUT CARD: METAL EMBOSSER runs the operating cycle without controlling for the
presence of a card.
PAUSE: METAL EMBOSSER executes each operation in response to the user input.
The key to activate each movement is START.
CONTINUOS
WITHOUT CARD
WITHOUT CARD & CONTINUOS
PAUSE
CONTINUOS & PAUSE
WITHOUT CARD & PAUSE
WITHOUT CARD – CONTINUOS & PAUSE
READY
The direction keys
ME1000 – Operators Manual
are using to move the cursor in the menu.
Page 51 of 91