Download MF GROUP SpA - CIM

PREMESSE
Card Layout (Pre formatting)
It is recommended to make a layout of the
card to be formatted with all the special
parameters, such as mod checks,
character size, number of fields, field
position, etc… before starting the
formatting procedure. What to do before
programming a new format:
1 Layout a card as desired or use a
similar existing embossed card. There
is a formatting template at the back of
this manual.
2 Make a table for the necessary
programming requirements.
There are blank forms at the back of this
manual. The following card format will be
used as a programming example in
describing the formatting functions in this
section.
Example of a Formatted Card.
Format Layout
A specification sheet should be completed for every format. The following is an example sheet
written in order to help in the preparation for the formatting of the Card in Figure C.2. The template
at the end of this manual can be used in determining the X and Y co-ordinates. The forms at the
end of this manual can be used to record the necessary programming values.
FORMAT No.14
FORMAT NAME TEST
CARD FORMATTING SPECIFICATION SHEET
*V=VARIALBLE, M=MOD CHECK, C=COUNTER, P=PROTECTED, F=FIELD DUPLICATE,
T=TIPPER, N=INFILL
ME1000 – Operators Manual
Page 81 of 91