Download MF GROUP SpA - CIM

PREMESSE
5. HOW TO PRODUCE ONE CARD…………………………………………………………………………………32
5.0 HOW TO PRODUCE ONE CARD...…………………………………………………………………….......33
5.1 SETTING THE MACHINE…………......................................................................................................33
5.1.1 Automatic (2000) version...………………………………………………………………………...…34
5.1.1.1 Loader adjustment…………………………………………………………………………………..34
……….5.1.1.2…Unloader adjustment………………………………………………………………………………..34
……….5.1.1.3…Unloader lift adjustment…………………………………………………………………………….35
……….5.1.1.4…Unloader ejector adjustment……………………………………………………………………….35
5.1.2 Manual (1000) version………………………………………………………………………………...35
……….5.1.2.1…Loader/Unloader adjustment………………………………………………………………………35
5.1.3 Embossing pressure adjustment…...….…………………………………………………………….36
5.2 SWICHING ON THE MACHINE…..………………………………………………………………………….37
5.3 INSTALL THE SOFTWARE “SWORD”……………..……………………………………………………….38
5.4 RUN THE PROGRAM AND PRODUCE ONE CARD……………………………..……………………….39
6. MAINTENANCE..……………………………………………………………………………………………………41
6.1 SCHEDULED LUBRIFICATION……..………………………………………………………………………42
6.2 RECOMMENDED LUBRICANTS……………………………………………………………………………42
6.3 GENREAL MAINTENANCE BY THE OPERATOR……………………………………………………......43
6.3.1 Trolley-Truck Oiling……...…………………….………………………………………………….......43
6.3.2 Plate loader oiling…….………………...……………………………………………………………..43
6.3.3 Stamping Unit…………………………………………………………………………………............44
6.4 TECHNICAL MAINTENANCE……………….….……………………………………...…………………….44
6.4.1 Oiling the Jaws…………………………………………………………………………………………44
6.4.2 Unloader lifter…………………………………………………………………………………………..44
6.5 SAFETY INTERLOCK SWITCH FUNCTIONAL TEST……………………………..……………………..45
……….6.5.1…Lubricating the motor pulley bearing………………………………………………………………..45
……….6.5.2…Safety interlock switch functional test………………………………………………………………45
7. TROUBLE SHOOTING..……………………………………………………………………………………….......46
7.1 ERROR MESSAEGES AND PROBLEM SOLVING……………………………………………………......47
A. THE MACHINE’S SET UP…………………….……………………………………………………………...……49
A.0 SETUP PROCEDURE…………….………………………………………………………………………….50
A.1 KEYBOARD DESCRIPTION……......……………………………………………………………………….50
A.2 MENU DESCRIPTION..………………………………………………......................................................52
……….A.2…Modifying the parameters.
52
A.3 GENERAL PROGRAMMING OF THE MACHINE……...………………………………………………....54
A.4 CONFIGURATION PARAMETERS…...…………………………………………………………………….56
A.5 SERIAL PORT PROGRAMMING………………...…………………………………………………………57
A.6 MECHANICAL PARAMETRS ADJUSTMENT...………………………………………………………......58
A.7 PROTOCOLS SETTINGS…………..………………………………………………………………………..59
A.8 PASSWORD………………………………………………………………………………………………......62
A.9 EMBOSSING CONFIGURATION...…………………………………………………………………….......63
A.10 KEYPAD LCD SETTING…………………………………………..…………………………………………64
A.11 RESET OF PARAMETERS………….………………………………………………………………………66
A.12 DISPLAYING THE COUNTERS……..………………………………………………………………….......67
A.13 CARD TEST LIST……………………………………………………………………………………………..68
A.14 RESET OF THE MACCHINE..……………………………………………………………………………….68
ME1000 – Operators Manual
Page 4 of 91