Download ControlLogix Motion Module Overview

8-10
Configuring an Ultra 3000 Drive
Status
Displays the status the controller has about the module:
This status:
Indicates:
Standby
A transient state that occurs when shutting down.
Faulted
The controller is unable to communicate with the module.
When the status is Faulted, the Connection tab displays
the fault.
Validating
A transient state that occurs before connecting to the
module.
Connecting
A state that occurs while the connection(s) are being
established to the module.
Running
The module is communicating and everything is working
as expected.
Shutting Down
The connections are closing.
Inhibited
The connection to the module is inhibited.
Waiting
The connection to this module has not yet been made due
to one of the following:
• its parent has not yet made a connection to it
• its parent is inhibited§
• its parent is faulted
Offline
You are not online.
Connection Tab
Use this tab to define controller to module behavior. On this tab, you
can:
• Select a requested packet interval.
• Choose to inhibit the module.
• Configure the controller so loss of the connection to this module
causes a major fault.
• View module faults.
Publication 1756-UM006B-EN-P - July 2001