Download ControlLogix Motion Module Overview

Transcript
3-18
Adding and Configuring Your 1756-M02AE Motion Module
Multicast CRC Error Threshold
This value is the point where it enters a fault state because of Cyclic
Redundancy Check (CRC) errors.
Transmit Retry Limit
Not applicable to motion module.
Set Limit Button
You must click on the Reset Limit button to make the new Transmit
Retry Limit effective. If you do not and then click either the OK or the
Apply button, this limit is not set.
Receive Error Counters
This box displays the number of receiving errors that occurred in the
following categories:
• Bad CRC – errors that occurred on received frames (messages)
• Bus time-out – when the receiver timed out
• CRC error – multicast receive errors
Transmit Error Counters
This box displays the number of transmitting errors that occurred in
the following categories:
• Bad CRC – errors that occurred on transmitted frames
• Bus Time-out – when the transmitter bus timed out
Refresh
Click on the Refresh button to refresh the tab. When you refresh the
tab:
Publication 1756-UM006B-EN-P - July 2001
if you’re using:
then:
digital, analog, or motion
modules
counters are cleared
another module
the tab is refreshed but the counters are not
cleared