Download Configuration and Administration Guide

Transcript
Pfad: C:\Documents and Settings\bhodgson\My Documents\working\Solaris and Linux\4.1A20\SIS41A20\no
changebars\SIS41A20.k03
25. November 2003 Stand 16:31.12
by S. Thums OEC MW SQ PS © Siemens Nixdorf Informationssysteme AG 1997
Dokuschablonen (OECBook) V1.0
Configuration
Creating a new configuration file
PRIVATE and PROXY providers
Create a PRIVATE or PROXY provider as follows:
1. Enter the Host/IP address.
2. Select or edit the appropriate netmask in the Netmask field.
3. For PROXY addresses, you can select the following (see Figure 29):
– Preferred gateway by selecting a node from the Pref-GW pull-down list.
– Failover node from the list of available nodes
4. Click on the Add button.
Select the Define Private Addresses option and click on Next to bring up the define
PRIVATE addresses window (see Figure 28).
Figure 28: Define PRIVATE addresses window
U42120-J-Z100-3-76
57