Download PM1000+ - Voltech Instruments
Transcript
USING VOLTAGE AND CURRENT TRANSDUCERS REMOVE ANY CONNECTIONS TO THE NORMAL ALO TERMINAL! ! EXT-LO and ALO are connected inside the PM1000+. To avoid errors and a risk of electric shock, remove all connections to ALO. 3. Set up the PM1000+ to measure current from the EXT-HI and EXT-LO terminals. Press ’MENU’ Select ‘Inputs’ and press Select ‘Shunts’ and press Select ‘External’ and press Press ‘MENU’ to return to the measurement display. 4. Scale the measurement on the display. The default scale is 1V = 80A. The scale required for any external shunt is given by: Scale = 1 / (80 x R) (where R is the resistance value of the external shunt). In this example where R = 0.001 Ohms Scale = 1 / (80 x 0.001) Scale = 1 / 0.08 = 12.5 To enter a scale factor for current: Press ’MENU’ Select ‘Inputs’ and press Select ‘Scaling’ and press Select ‘Amps’ and press Page 24 © Voltech 2011 PM1000+ Power Analyzer User Manual