Download PM1000+ - Voltech Instruments

SAEFTY INFORMATION
•
Specification added to section 7.5 for IEC current harmonics mode and Voltage
Flicker mode.
•
Added section 6 which details all the available software for the PM1000+.
•
Clarified specification examples in section 7.5.
Version 8 to Version 9 (Version 4.21 firmware).
•
Change made to Frequency Filter description regarding signals that are a small
percentage of range (see section 4.6).
•
Added communication commands to configure Harmonic THD parameters in
section 5.2.
Version 9 to Version 10 (Version 4.21 firmware).
•
Added specification for current channel common mode rejection in section 7.5.
•
Add notes to the description of Standby mode in section 4.5.
Version 10 to Version 11 (Version 4.22 firmware).
•
Added an improved specification for 45-65Hz, Volts, Amps and Watts.
Version 11 to Version 12 (Version 4.23 firmware).
•
Added section 8.5, Language Upload Option.
Version 12 to Version 13 (Version 4.24 firmware).
•
The “1” key can now be used to start and stop data-logging on the enhanced
comms model. Information was added to section 2.9. This is align the firmware
with a new front panel overlay.
Version 13 to Version 14 (Version 4.24 firmware).
•
Under product specification added Voltage and Current input capacitance.
PM1000+ Power Analyzer User Manual
© Voltech 2011
Page 87