Download uC/GUI user manual

Transcript
194
CHAPTER 5
Device drivers
5.4.5.4 FS_MMC_DeactivateCRC()
Description
Deactivates the cyclic redundancy check.
Prototype
void FS_MMC_DeactivateCRC (void);
Additional information
By default, the cyclic redundancy check is deactivated for speed reasons. The driver
supports cyclic redundancy check both for all transmissions and just for critical transmissions. You can activate and deactivate the cyclic redundancy check as it fits to the
requirements of your application.
User's & reference manual for μC/FS
© 2004-2007 Micrium