Download D53 Manual
Transcript
Function setting 6. 5 Zone MAIN MENU A PTZ may be set up to 8 zones; the regional scene can't be overlapped. SYSTEM SETTING CAMERA SETTING FUNCTION SETTING WINDOW BLANKING EXIT User can set label for each zone. When setting【ZONE LABEL】 as ON, the PTZ will display zone label as it runs some zone. It is convenient to know the zone that the camera shoots by setting zone label. 1、The system enters into the main menu by calling 95 preset or by calling 9 preset twice within 3 seconds. 2、Operate the joystick, move the cursor to 【FUNCTION SETTING】, press FUNCTION SETTING PRESETS SCAN PATTERNS TOUR ZONES TIME RUNNING AUTO TRACKING BACK EXIT 【OPEN】to enter submenu. 3、Operate the joystick, move the cursor to 【ZONES】, press 【OPEN】 to enter submenu, shown as the left picture. ● 【ZONES NUMBER】 ● 【SET LEFT LIMIT】 ● 【SET RIGHT LIMIT】 ● 【CLEAR ZONE】 ● 【EDIT ZONE LABEL】 Regard the left/right limit as the demarcation line, and set the middle part as a zone. Various operational ways are the same as other settings in the menu. Therefore we won't explain it again. ZONES ZONES NUMBER SET LEFT LIMIT SET RIGHT LIMIT CLEAR ZONE EDIT ZONE LABEL BACK EXIT EDIT ZONE LABEL LABEL:ZONE-1 BACK EXIT 30 1