Download D53 Manual

Transcript
Function setting
6. 5 Zone
MAIN MENU
A PTZ may be set up to 8 zones; the regional scene can't be overlapped.
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
EXIT
User can set label for each zone. When setting【ZONE LABEL】 as ON,
the PTZ will display zone label as it runs some zone. It is convenient to
know the zone that the camera shoots by setting zone label.
1、The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
2、Operate the joystick, move the cursor to 【FUNCTION SETTING】, press
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
AUTO TRACKING
BACK
EXIT
【OPEN】to enter submenu.
3、Operate the joystick, move the cursor to 【ZONES】, press 【OPEN】 to
enter submenu, shown as the left picture.
●
【ZONES NUMBER】
●
【SET LEFT LIMIT】
●
【SET RIGHT LIMIT】
●
【CLEAR ZONE】
●
【EDIT ZONE LABEL】
Regard the left/right limit as the demarcation line, and set the middle
part as a zone. Various operational ways are the same as other settings in the
menu. Therefore we won't explain it again.
ZONES
ZONES NUMBER
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
EDIT ZONE LABEL
LABEL:ZONE-1
BACK
EXIT
30
1