Download Operating instructions V-Flow Line

V-Flow Line
Limit indicator
The V-100 variable area flowmeters can be equipped with a maximum of two limit indicators.
The instruments with limit indicators have the following standard design:
Minimum Switch
Maximum Switch
Initiator position
Switching status
Note: In case of power failure, the contact closes irrespective of the position of the float.
For initialization, the float must first pass the initiator so that it is recognized by the initiator and the
float position is defined.
Wiring diagram
Limit indicator RC-10../RC-15, e.g. Pepperl + Fuchs Type KFD2-SR2-Ex1.W (24 VDC)
brown
blue
Manual
Version
V-Flow Line
vflow_E4_7
Page
© Vögtlin Instruments AG
21