Download user manual

Transcript
Troubleshooting iDevices and incompatible messages
If the iDevice (iPhone, iPad, etc) shows an incompatibility message, it basically
translates to it needing more power. These messages will not, in any way,
harm your iPhone. It means the sCharger-8 is not outputting the full energy
needed to activate the iDevices’ internal charger. Make sure the sCharger-8 is
in the sun. After you plug your iDevice into the sCharger-8 and you see the
charge icon activate then you are charging. If not, then unplug the phone and
plug it back in while the sCharger-8 is in the sun then let the sCharger-8 do its
job. Use port “A” for Auto-Retry. For battery status verification, take a note of
the percentage charged(*see note below) then come back in ten minutes and
verify how much it increased.
*Go to Settings->General->Usage then turn Battery Percentage “ON”.
Website and Videos
Informational videos www.suntactics.com/videos
Support, user manual updates and FAQs www.suntactics.com/support
8