Download User Manual - Schneider

Operating Modules from the Application
Language Objects Associated with Configuration
At a Glance
The configuration of an analog module is stored in the configuration constants (%KW).
The parameters r, m, and c shown in the following tables represent the topologic addressing of the
module. Each parameter had the following signification:
r: represents the rack number
m: represents the position of the module on the rack
c: represents the channel number
BME AHI 0812, BMX AMI 0410, BMX AMI 0800, and BMX AMI 0810 Configuration Objects and
Inputs of BMX AMM 0600
The process control language objects associated to the configuration of the BME AHI 0812,
BMX AMI 0410, BMX AMI 0800, and BMX AMI 0810 modules include the following:
Addresses
Description
Bits Meaning
%KWr.m.c.0
Channel range
configuration
Bit 0 to 5: electric range (hexadecimal value)
Bit 7: 0=electrical range (always 0)
%KWr.m.c.1
Scale/User scaling min value
%KWr.m.c.2
Scale/User scaling
max value
-
%KWr.m.c.3
Over range below
value
-
%KWr.m.c.4
Over range above
value
-
%KWr.m.c.5
Channel treatment
configuration
Bit 0:
Bit 1:
Bit 2:
Bit 7:
Bit 8:
Bit 9:
EAV16400 04/2014
0=Mast mode, 1=Fast mode
0=channel disabled, 1=channel enabled
0=sensor monitor off, 1=sensor monitor on
0=Manufacturer scale, 1=user scale
over range lower threshold enabled
over range upper threshold enabled
207