Download SPARSH VP110 User Guide V2
Transcript
Or, • Press the Headset key to deactivate the Headset mode. • Calling party/Caller: The person who makes the call. • Called party/Callee: The person to whom the call is made. • User: The person who is in possession of the SPARSH VP110 IP phone and uses it. • Remote user/Remote party/Remote end/Far end: The person with whom the user interacts. • Phone/IP Phone: Both of these terms have been used synonymously in this document to refer to Matrix SPARSH VP110. Using this document, we hope, you will be able to install, operate and make optimum use of SPARSH VP110. If you encounter any technical problems, contact your dealer/reseller or you can mail Matrix Technical Support in the following id: [email protected]. Matrix SPARSH VP110 User Guide 5
Related documents
Polycom SIP 3.0.2 User's Manual
Polycom 1.4.x User's Manual
Yealink CP860 Specifications
Cisco Systems OL-20949-01 User's Manual
Cisco OL-6900-01 Specifications
Aruba Instant User Guide - Airheads Community
Scanner 2000 Steam Mass Flow Transmitter Software User manual
Yealink SIP-T19 Specifications
University of Southern Queensland Design
Yealink T3X-V70 Release Notes
Yealink T3X-V70 Release Notes
SPEMS Communications Manual - 2013