Transcript
30 45 3 9 20 www.ronda-startech.com 60 12 Cal. 5050.B 10 6 8 7 15 30 9 10 1 21 2 3 Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month English User’s Manual In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales 30 Display elements Control buttons 20 8 7 Minute hand Hour hand Push-button A 30 45 3 6 10 8 7 Hour counter 15 21 2 3 1 � Zero positioning: 45 3 9 8 7 30 9 10 1 21 2 3 � Push-button B Second counter 30 60 12 45 3 9 � � 10 6 8 7 Chronograph: Accumulated timing � � Push-button A 15 30 9 10 1 21 2 3 Example: � Start: (start timing) � Stop: (e.g. 15 min 5 sec following �) 1 Hour counter ⁄10 second counter Second counter Minute counter 30 30 9 10 1 21 Push-button B 2 3 Hour counter (The accumulated measured time is shown) � Reset: 30 The 4 chronograph hands are returned to their zero positions. 60 12 45 3 9 20 10 6 8 7 15 Please note: * Following �, the accumulation of the timing can be continued by pressing push-button A (Restart / Stop, Restart / Stop, …) 30 9 10 1 21 2 3 � Push-button B Centre stop-second Minute counter � 30 45 3 10 6 8 7 15 30 9 10 1 21 I 2 3 II 60 12 45 3 10 6 8 7 III 21 � Push-button B Adjusting the chronograph hands to zero position ⁄10 second counter 45 3 10 8 7 15 30 9 10 1 21 III 2 3 � Returning the crown to position I 45 3 6 � 60 12 10 8 7 Setting the date (quick mode) �* Pull out the crown to position III 30 (the watch stops). 15 I 2 3 21 II 45 3 6 � 60 12 9 20 30 9 10 1 Termination of the chronograph hands adjustment (can be carried out at any time). III II Setting the time � 9 Adjusting the next hand B Adjusting the minute counter hand and the hour counter hand (mechanical coupled) A Single step 1 x short A long � Continuous � I Second hand 20 � A � Push-button B 30 Adjusting the next hand B Adjusting the 1⁄10 second counter hand (position 6h) A Single step 1 x short A long � Continuous B simultaneously for at least 2 seconds (the centre stop-second rotates by 360° � corrective mode is activated). � 60 6 � A (all 4 chronograph hands are in their correct or incorrect zero position). 1 12 9 Adjusting the centre stop second A Single step 1 x short A long � Continuous B � Keep push-buttons A and B depressed 20 � A Push-button A 30 2 3 � Pull out the crown to position III Hour counter Please note: * Following �, further intervals or intermediates can be displayed by pressing push-button B (display interval / make up measured time, ...) 30 9 10 1 Example: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). 60 12 9 20 30 9 20 Push-button A 15 10 8 7 (e.g. 10 min 5 sec following �) = 25 min 10 sec Example: � Start: (start timing) � Display interval: e.g. 10 minutes 10 seconds (timing � continues in the background) � * � Making up the measured time: (the 4 chronograph hands are quickly 1 ⁄10 second counter advanced to the ongoing measured time). � Stop: (Final time is displayed) � Reset: The 4 chronograph hands are returned to their zero position 15 45 3 6 Chronograph: Intermediate or interval timing � � 60 12 9 20 � Restart: (timing is resumed) �* Stop: Press push-button B. (The 4 chronograph hands will be reset to their zero positions). 15 10 6 ⁄10 second counter Minute counter push-button A once more and read the 4 chronograph counters: 4h / 20 min / 5 sec / 7⁄10 sec ⁄10 second counter 60 12 20 Date Example: � Start: Press push-button A. � Stop: to stop the timing, press 2 3 30 Push-button B Centre stop-second 20 21 Crown 30 9 10 1 30 9 10 1 Hour counter 60 12 9 20 Minute counter Push-button A 15 10 6 Second hand 1 45 3 (Start / Stop / Reset) � � 60 12 9 Chronograph: Basic function Second counter Minute counter Description of the display and control buttons 10 III 8 7 � Turn the crown until you reach the correct time 8:45. � Pull out the crown to position II (the watch � continues to run). 15 30 9 10 1 I 2 3 31 II � Turn the crown until the correct date 1 appears. � Push the crown back into position I. �* Push the crown back into position I. 30 20 45 3 9 6 � 60 12 10 8 7 15 30 9 10 1 I 2 3 21 II III 30 45 3 6 10 8 7 15 30 9 10 1 17 I 2 3 20 45 3 6 10 8 7 II Please note: During the date changing phase between 9 PM and 12 PM; the date must be set to the date of the following day. � 60 12 15 An extreme acceleration in setting the date with quick mode can induce a false date indication. The synchronization is re-established by setting the date from 01 till 31 (crown in position II). 30 9 10 1 I 2 3 01 II Second hand Example: – Date / time on the watch: 17 / 1:25 AM 4 / 8:30 PM – Present date / time: � 60 12 9 30 9 Setting the date/time Crown 20 Please note: * In order to set the time to the exact second, � must be pulled out when the second hand is in position «60» (I). Once the hour and minute hands have been set, � must be pushed back into position I at the exact second. 30 45 3 6 10 � Pull out the crown to position II 8 7 (the watch continues to run). �* Pull out the crown to position III � 60 12 9 20 � (the watch stops). 15 � Turn the crown until the correct date 30 9 10 1 03 I 2 3 II III 4 correct time 8:30 PM appears. Date � Push the crown back into position I. � Turn the crown until yesterday’s date 30 45 3 6 � 60 12 9 20 appears. �** Continue to turn the crown until the 10 8 7 � appears 3 . 30 20 30 9 10 1 03 2 3 I II 45 3 9 6 10 8 7 � � 60 12 15 9 10 1 04 15 30 2 3 I II � III Please note: * To set your watch to the exact second, please refer to the chapter entitled «setting the time». ** Please observe the AM/PM clock rhythm. 06 / 2009 Ronda AG CH-4415 Lausen/Switzerland