Download PreDAC - User`s Manual

PreDAC User’s Manual
Software commands
2.3.6 ID Command
The “ID:?\r\n” command returns the pre-assigned PreDAC identification name
as a string.
The reply from the PreDAC contains the value stored in the module EEPROM
and it assumes the following format:
ID:module_id\r\n
where:
-
module_id is the module identification name stored in non-volatile memory as
an ASCII string.
The ID command, being a reading command, returns a response in any module
condition.
Examples:
ID example with the module identification “Actuator1”:
ID:?\r\n
ID:ACTUATOR1\r\n
29