Download GUI Graphical User Interface: Rail Switch Power Smart (RSPS)

Diagnostics
Parameters
Rx Power State
8.3 Ports
Meaning
Power level of the signal received: The threshold values are specified by
the SFP transceiver.
Signal strength is OK.
Signal strength is lower than the SFP manufacturer
recommendation. The signal can still be used.
No signal or signal strength too low.
Table 253:Table in the Diagnostics:Ports:SFP dialog (cont.)
 Buttons
Button
Reload
Meaning
Updates the fields with the values that are saved in the volatile memory
(RAM) of the device.
Opens the online help.
Help
Table 254:Buttons
8.3.4
Port Monitor
This feature monitors port states. The device offers you the ability to disable
the port or send a trap when user-defined conditions occur. Definable port
conditions are link flap, CRC/Fragments, and Duplex Mismatch Detection.
Proceed as follows to enable the action if a port state occurs:
 Enable the port monitor globally.
 Enable the port monitor on a port.
 Configure the conditions on a port.
 Configure an action to perform on that port when the condition occurs:
RM GUI RSPS
Release 2.0 02/2013
269