Download IPM Classic User`s Guide
Transcript
User’s Guide FullHouse Software, Inc. To reverse a check, click on Reversal and the check will be marked Reversal. 7. To declare the check NSF, click on NSF. A window will ask for an account to charge the NSF fee and the amount of those fees. Press F5 and select the account. Then press Tab and enter the amount of the charge. Click on OK. 8. Click on Add Entry and the entry will be generated. 9. To declare NSF or reverse more checks, click on either Select Unit # or Select Tenant and select another check. 10. When done click on OK. 11. The system will ask if these changes are to be posted at this time. If Yes is clicked, the changes will be posted. If NO has been selected, the NSF and reversed checks may be edited or deleted through Receipts | Change or Delete Receipts. 6. Change or Delete a Tenant Receipt Tenant Receipts may only be changed or deleted if they have yet to be posted. Posted receipts may only be reversed. Miscellaneous receipts are not accessible using this method, see Entering Miscellaneous Receipts for more information. 1. Make certain that the correct checkbook and property are active. If you are not in the right checkbook and property, change them under Current Settings. 126 Copyright 2010 © FullHouse Software, Inc.