Download IPM Classic User`s Guide

User’s Guide
4.
5.
6.
7.
8.
9.
FullHouse Software, Inc.
Enter the Unit Nbr, up to ten letters, numbers and/or
symbols. All units should contain the same number of
characters to allow for accurate sorting. For example if your
property has 100 units you would number them 001 to 100,
using a zero in the null spaces.
Enter the square footage of the unit. If this is left blank the
unit cannot be charged C.A.M. passthroughs based on
square footage. If you choose to use an alternate form of
measure, the system will still work, so long as all units are
measured with the same system, example: meters, yards…
Enter the unit description. Usually the number of bedrooms
and bathrooms, or a brief description for reporting. Complete
the descriptive fields as necessary.
Enter a value for Potential Rent.
Click on Save. If more units are to be entered in this
property, repeat the process until complete.
When all the units for this property have been entered click
OK and the Units window will close.
Changing a Unit
1.
2.
3.
4.
5.
6.
7.
Make sure the correct checkbook and property are active. If
not change the checkbook in the Current Settings on the
upper right corner.
Click on the Units icon.
Click Find to list all units in the current property. Click on the
unit you wish to edit.
Edit the information on the unit.
Click on Save to save the changes, or Cancel if you wish to
ignore the changes.
Click on Find if you wish to edit more units in this property.
Click Exit once you are done making changes in this
property.
Deleting a Unit
1.
2.
3.
4.
68
Make sure the correct checkbook and property are active. If
not change the checkbook in the Current Settings on the
upper right corner.
Click on the Units icon.
Click Find to list all units in the current property. Click on the
unit you wish to delete.
Click Delete and if the unit is occupied the system will
display the name of the occupant and ask to confirm the
Copyright 2010 © FullHouse Software, Inc.