Download E-Sampler Operation Manual

5.9
Setup Flow Control
FLOW MODE: PM1
FLOW RATE: 3.5 LPM
SAVE
EXIT
Figure 28 Setup Flow Control screen.
Parameter
Description
FLOW MODE A pick list of flow rate names with preset flow rate set
points.
FLOW RATE
The flow rate set point is editable from 2.0 to 3.5 LPM.
Mode
Rate (LPM)
PM1
3.5
PM2.5
2.0
PM10
2.0
MANUAL
2.0 to 3.5
Press the MENU or ESC key to return to the Setup Menu screen.
Press the SAVE soft key to return to the Setup Menu screen with changes saved.
Press the EXIT soft key to return to the Setup Menu screen with changes not saved.
5.10 Setup RH Control
INTERNAL RH: 50 %
RH SETPOINT: 100 %
SAVE
EXIT
Figure 29 Setup RH control screen.
Parameter
Description
RH SETPOINT
The RH set point. Editable from 0 to 100 %.
Press the MENU or ESC key to return to the Setup Menu screen.
Press the SAVE soft key to return to the Setup Menu screen with changes saved.
E-Sampler-9800 Rev A
Page 41