Download T2 Elite/Pro/Express User Manual

Section 8 ― Playing/Editing
¾¾Properties of place holder
[Event Info] tab
Displays the information on the place holder.
You can check the event name, event type, In/Out
points, duration, alpha channel presence, the name of
the contents being linked, etc.
You can change the event name and duration.
[GPI] tab
When controlling an external device with GPI
output, allows to check or set the trigger event
actions. (Only for P1 channel.)
Controlling external devices from T2 with GPI output►P213
[Timecode] tab
Specifies starting timecode of an event. (Enabled
when [According to event setting] is selected on the
[Timecode] tab in the playlist property.)
To use the starting timecode of a media file, select
[Source].
To specify a starting timecode, select [Specify start
time], tap the entry area, and enter timecode.
[Start Effect] tab
Allows to check or set the effects for event starting
(start effects).
Setting effects on an event►P110
[End Effect] tab
Allows to check or set the effects for event ending
(end effects).
Setting effects on an event►P110
2 Set each item and click [OK].
116
T2 Elite/Pro/Express User Manual
September 20, 2013