1
Download - D-Link
Transcript
DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide Switch# configure terminal Switch(config)# ip dhcp class Service-A Switch(config-dhcp-class)# option 60 hex 112233 Switch(config-dhcp-class)# option 60 hex 102030 Switch(config-dhcp-class)#exit Switch(config)# ip dhcp pool pool1 Switch(config-dhcp-pool)# relay source 172.19.18.0 255.255.255.0 Switch(config-dhcp-pool)# class Service-A Switch(config-dhcp-pool-class)# relay target 10.2.1.2 Switch(config-dhcp-pool-class)# 16-22 service dhcp This command is used to enable the DHCP relay service on the Switch. Use the no form of this command to disable the DHCP relay service. service dhcp no service dhcp Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to enable the DHCP relay service on the switch. Example This example shows how to disables the DHCP server and relay service. Switch#configure terminal Switch(config)#no service dhcp Switch(config)# 16-23 show ip dhcp relay information trusted-sources This command is used to display all interfaces configured as trusted sources for the DHCP relay information option. show ip dhcp relay information trusted-sources Parameters 168
