1
Download - D-Link
Transcript
DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide Switch# configure terminal Switch(config)# errdisable recovery cause psecure-violation interval 200 Switch(config)# This example shows how to enable the auto-recovery option for port security violations. Switch# configure terminal Switch(config)# errdisable recovery cause psecurity-violation Switch(config)# 26-2 show errdisable recovery This command is used to display the error-disable recovery timer related settings. show errdisable recovery Parameters None. Default None. Command Mode EXEC Mode or Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to verify the settings of the error disable recovery timer. Example This example shows how to display the settings of the error disable recovery timer. 242
