Download - D-Link

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
rising-threshold VALUE
Specifies the rising threshold. The valid range is from 0 to
4294967295.
RISING-EVENT-NUMBER
(Optional) Specifies the index of the event entry that is used to notify
the rising threshold crossing event. The valid range is from 1 to 65535.
If not specified, no action is taken while crossing the ringing threshold.
falling-threshold VALUE
Specifies the falling threshold. The valid range is from 0 to
2147483647.
FALLING-EVENT-NUMBER
(Optional) Specifies the index of the event entry that is used to notify
the falling threshold crossing event. The valid range is from 1 to 65535.
If not specified, no action is taken while crossing the falling threshold.
owner STRING
Specifies the owner string. The maximum length is 127.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The RMON alarm facility periodically takes samples of the value of variables and compares them against
the configured threshold.
Example
This example shows how to configure an alarm entry to monitor an interface.
Switch# configure terminal
Switch(config)# rmon alarm 783 1.3.6.1.2.1.2.2.1.12.6 30 delta rising-threshold 20 1
falling-threshold 10 1 owner Name
Switch(config)#
54-4 rmon event
This command is used to configure an event entry. To remove an event entry, use the no form of this
command.
rmon event INDEX [log] [[trap COMMUNITY] [owner NAME] [description TEXT]
no rmon event INDEX
Parameters
INDEX
Specifies the index of the alarm entry. The valid range is from 1 to
65535.
log
(Optional) Specifies to generate log message for the notification.
trap COMMUNITY
(Optional) Specifies to generate SNMP trap messages for the
notification. The maximum length is 127.
owner NAME
(Optional) Specifies the owner string. The maximum length is 127.
504