Download Touch Probes - Flint Machine Tools, Inc.
Transcript
Fadal User Manual After selecting a fixture offset the CNC displays the current X, Y, and Z values and prompts the user with the following message: Figure 15-8 Z Fixture Offset Message Respond by pressing the Y key and begin the process of establishing the Z fixture offset. Then press the N key and the CNC continues the setup procedure using the current Z value. When a fixture offset is selected, the Z fixture offset value is subtracted from the current touch position when determining the length offset. A positive value increases and a negative value shortens the length offset. After selecting a fixture offset, the CNC moves X and Y axes to the fixture offset, loads the first tool, and begins the tool setting process by displaying the following menu: Figure 15-9 Tool Setting Options Menu April 2003 Section 15: Touch Probes 343