Download User manual EC

EC-Control User Manual
 Warning symbol: Indicates a fan that is reporting an active warning but not a failure state. Here, as
for the Default symbol, the background colour of the symbol is used to display the actual level
control coefficient.
 Icon for no communication: Indicates a fan that cannot be accessed for communication.
 Status unknown symbol: Indicates a fan whose status is not yet known.
Colours
 Standard colour: In box display, this is the colour used to display the fans for which no current level
control coefficient is known.
 Failure list: The colour used to indicate a fan that is reporting an active failure.
 Warning: The colour used to indicate a fan that is reporting an active warning but not a failure state.
 No communication: The colour used to indicate fans that can no longer be accessed.
 Status unknown: The colour used to indicate nodes in the tree whose status is not yet known.
 Font colour: Colour used to display information under a fan symbol.
 Text below fan icon : If you tick this option, the fan information is displayed below the symbol.
Otherwise, it is placed above the symbol.
 Group colour: If, in the structure tree, you select the node of a group of the lowest level (i.e. a group
that contains fans only), you can assign colours to them according to the setting for Automatically
mark groupsin the room plan . This setting can be used to define the colour. By principle, the
marking of a group is rectangular and may include fans that are not part of the group, depending on
the location of the fans.
 Transparency: This controller is used to define how intensely the room plan should appear through
the group markings. The scale ranges from 0% (no transparency) to 100% (marking completely
transparent).
Zoom
 Step 1: Indicates the zoom factor in percent from which the box display changes to symbol display.
 Step 2: Indicates the zoom factor in percent from which information is displayed under or over the
fan icon with font size 6 points.
 Step 3: Indicates the zoom factor in percent from which information is displayed under or over the
fan icon with font size 8 points.
 Step 4: Indicates the zoom factor in percent from which information is displayed under or over the
fan icon with font size 10 points.
 Adjust fan icon when zooming: If this checkbox is activated, the fan symbol will be made larger or
smaller when zooming. Otherwise, the symbol will always be displayed in its basic size.
 Default zoom: Indicates the zoom factor used as standard when the detail window is opened in
multimonitor mode. If you enable the detail window using View/Multimonitor/Separate windows, this
zoom factor is enabled in the detail window.
Miscellaneous settings

Display time: Time in seconds that the message bubbles, such as those used to display the fan
position, are visible.
57