1
Download User Manual - Flying Pig Systems
Transcript
Section 39: Servicing Appendices 10. Replace the cleaned fader. See Replacing Faders (p.418). 39.4 Replacing the Trackball ! Caution Always shut down and disconnect the mains power before removing the front panel. To replace the Trackball: 1. Remove the front panel. See Replacing Faders (p.418) steps 1 to 3. 2. Lift track ball out of its bezel. 3. Unplug the cable assembly from the trackball PCB » 4. Flying Pig Systems Reconnect and replace new Trackball. Important The only occasion on which the front panel PCB itself needs to be removed is to access the mass storage devices underneath; a procedure beyond the scope of this manual. 419
