Download Speed Dome Camera Controller Operation Manual
Transcript
(Figure 1) z Func(1 cam):Set special function of the system together with other buttons. z Zoom(Full screen) :Show picture of the camera in full screen. z PIP(up arrow):Show picture of the camera in PIP mode (Picture-in-Picture). z 2×2(down arrow):Show picture of the camera in 4-frame. z 3×3(left arrow):Show picture of the camera in 9-frame. z 4×4(right arrow):Show picture of the camera in 16-frame. z Live:Show live picture of the camera at current mode. z Tape:Playback pictures; Function + Tape: Playback video information of VCR. z CAM: Select address of the intelligent Speed Dome or multiplexer. z CALL: z PRESET:To set the preset position. z SHOT: To set up or call cruising track. z TIME: Set time for special function. z AUTO:To control auto-horizontal rotation for pan/tilt. z WIDE:To a wide angle. z TELE:To turn to a telescopic range. z FAR:To make focus far manually. z NEAR:To make focus near manually. z OPEN:To open iris. z CLOSE:To close iris. z ON:Switch on the setting of function. z OFF:Switch off the setting of function. z F1/F2:Auxiliary control buttons. z F3:Switching control between intelligent Speed Dome and Multiplexer. z 0-9: Number key z CLEAR:To clear inputted data z ENTER:To confirm To call the preset position.