Download Manual English

Transcript
z
z
z
z
z
z
z
TELNET console interface
BOOTP for IP address assignment
Firmware upgrade by TFTP file transfer protocol through Ethernet network.
Redundant power supply(optional)
(Layer 3 switch series only)
• Built-in DHCP Server
• DHCP Relay Agent
• L3 IP packets wired-speed Forwarding.
• RIP v1/v2, OSPF v2 for backward compatible
with traditional router
• 4K IPv4,address, 16K Routing table
• Layer 3 wired-speed routing among all ports(IPV4)
• Fully compatible with existing routing protocol:
RIP V1/V2, OSPF V2, PIM, DVMRP.
1 Male DB9 RS-232C console interface configured as DTE for operation, diagnostics, status,
and configuration information.
IEEE 802.3ac frame extension for VLAN tagging.
26