Download Manual English

9.8.8 show classofservice dot1p-mapping
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a
specific interface. The unit/slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the 802.1p mapping table
of the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
Format
show classofservice dot1p-mapping [unit/slot/port]
Mode
Privileged EXEC
The following information is repeated for each user priority.
User Priority
The 802.1p user priority value.
Traffic Class
The traffic class internal queue identifier to which the user priority value is
mapped.
9.8.9 show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for a specific
interface.
The <unit/slot/port> is optional and is only valid on platforms that support independent per-port
class of service mappings. If the <unit/slot/port> is specified, the IP DSCP mapping table of the
interface is displayed. If the <unit/slot/port> is omitted, the most recent global configuration
settings are displayed
Note:
The global configuration settings do not take precedence over the per-port
configuration settings.
Format
show classofservice ip-dscp-mapping[unit/slot/port]
Mode
Privileged EXEC
The following information is repeated for each user priority.
IP DSCP
The IP DSCP value.
Traffic Class
The traffic class internal queue identifier to which the IP DSCP value is mapped.
9.8.10 show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The unit/slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Format
Mode
show classofservice ip-precedence-mapping [unit/slot/port]
Privileged EXEC
237