1
Download Electro foam trim
Transcript
Chapter NEOLT spa USER’S MANUAL INSTALLATION • • Connect the machine to the mains. Make a 1.5 mt. cut in one panel, then place it on the extensions 1 (Fig. 5.37). Fig. 5.37 1 1 90° Follow this procedure to line up the guides with the panel. • Loosen the screws that fix the extension to the guide (Fig. 5.38). • Screw on or off the series of nuts that are under each extension until you reach the perfect parallelism with the panel above the two guides (Fig. 5.39). Fig. 5.38 Fig. 5.39 Electro foam trim plus VERSION: NLT-EFTP-06-04/2004 5-15
