Download Electro foam trim

Transcript
Attachment
NEOLT spa
USER’S MANUAL
Assembly and adjustment
LASER tracer optional
Use of the LASER tracer for cutting
C.1.1
The laser tracer is mostly needed when you need to precisely trim panels that have already
been marked for the cut. Follow this procedure to use the tracer:
• Switch on the laser tracer (Fig. C.20).
• Cut, following the procedure FEEDING PANEL TO CUT by lining up the profile to cut
with the LASER beam (Fig. C.21).
• Or follow the procedure 6.1.4 Cut with LASER tracer .
Fig. C.20
Fig. C.21
Electro foam trim plus
VERSION: NLT-EFTP-06-04/2004
C-5