Download Electro foam trim
Transcript
Attachment NEOLT spa USER’S MANUAL Assembly and adjustment LASER tracer optional Use of the LASER tracer for cutting C.1.1 The laser tracer is mostly needed when you need to precisely trim panels that have already been marked for the cut. Follow this procedure to use the tracer: • Switch on the laser tracer (Fig. C.20). • Cut, following the procedure FEEDING PANEL TO CUT by lining up the profile to cut with the LASER beam (Fig. C.21). • Or follow the procedure 6.1.4 Cut with LASER tracer . Fig. C.20 Fig. C.21 Electro foam trim plus VERSION: NLT-EFTP-06-04/2004 C-5