Download FAG ProCheck

FAG ProCheck
Create image file from the flash disk of a ProCheck device
Use CM Installer to create an image file containing the contents of the flash disk (operating system, system software and
all data) of a ProCheck device and transfer it to your computer.
Select the desired ProCheck device.
Click on the Get Image tab.
Click on the folder icon next to Image Path Get. Select the folder in which you wish to save the image file.
If you only want to save the operating system (without system software and measuring data) in an image file, check
the Installed Software only? checkbox.
Click Get Image.
The image file is created, transferred and saved in the selected directory of your computer. This process takes some
time.
Format flash disk
CAU TIO N
Loss of data
W hen you form at the flash disk, any m easuring data, configurations and settings w ill be lost.
Therefore, transfer all data from the ProCheck device to the com puter by m eans of the FAG
Adm inistrator softw are prior to form atting. M ore inform ation can be found in the FAG
Adm inistrator m anual.
Select the ProCheck device for which you wish to delete the flash disk.
If the ProCheck device is in the same subnet as your computer, check the Local subnet? checkbox. Otherwise
uncheck this checkbox.
In the Format Target tab, click on Format.
The flash disk will be deleted completely without additional warning.
Click Reboot after format? to restart the ProCheck device.
Adjust the IP settings as described in chapter "IP settings"
31
.
33