Download User Manual
Transcript
5 Pulse counter F4 F5 F6 Inputdamping (Attenuation) Set / Reset- Mode dynam./ static Reset 3 PNP TTL-Level 0 30 Hz damping (e.g. for mechanical contacts) 1* F max. (see chapter 4 and 10) 0* Reset to 0 1 Automatic reset to 0 after reaching Preset 2 2 Set to Preset 2 3 Automatic selection of Preset 2 after reaching 0 0* Static reset (reset as long as the signal is applied) 62