Download User Manual

4 General description of the multifunction counter
Static/dynamic reset:
Static reset:
Dynamic reset:
Reset over the entire pulse width of the reset pulse
Reset via the active edge; thereafter, counter operation is possible
independently of the pulse width of the reset pulse.
Exception: Tachometers do not have a reset/set function
Teach input:
Using the Teach Input (application input) the counter status is imported in Preset 2.
Decimal Point:
The decimal point is only an optical reading assistence on the display and does not change
the value. For example, for a value of 1 pulse per cm, the setting 0,00 makes it easier to
read the value in m and cm.
Exception: This does not apply to tachometers and timers.
Please refer to the detailed Tachometer and Timer descriptions.
46