Download RFQ User Manual - Integrated Software,Inc
Transcript
ISI Request for Quote EMAILING FROM THE RFQ VENDOR WINDOW This section describes the email functionality which can be used to email the RFQ Documents to the desired vendor, salesperson etc. This is done from the RFQ Vendor window. Initial Setup: Enter email addresses for all desired vendors in the Internet Information window. This window can be opened from the Vendor Maintenance window. To do this, click the Internet Addresses (i) icon next to the Address ID field on the Vendor Maintenance window (Cards->Purchasing>Vendor). In the Internet Information window, enter the string MAILTO: and then append the email address for the E-mail field. Click Save to save your changes. Fill in the email addresses as explained above for all desired vendors. The workstation from which you wish to send emails must locally have an email system with MAPI (Microsoft Application Program Interface) enabled. Click on the Internet Addresses icon (i), which is next to the “Address ID” field on the RFQ Vendor window. This will open the Internet Information window with the Vendor ID and the Address ID defaulted to be the same as what is displayed on the RFQ Vendor window, as shown below: Page 28