Download MVI69-PDPMV1 User Manual

MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform
PROFIBUS DPV1 Master
Mailbox Messaging
User Manual
Command:
 Message data word 1-63
Byte-array stating which slave/slaves to start. Array index is equal to slave
address.
0: Do not affect slave
1: Start slave
2-255: Reserved
Response:
 Message information (in response header)
"Invalid Data Size" is returned if Data size in the command header does not
equal 126.
If "Invalid Other" is returned, further information is to be found in Extended
word 8.
 Additional Fault information (Extended word 7)
If Extended word 8 equals 0x000A -"Failed to execute request", additional
info can be found here.
 Fault information (Extended word 8)
0x0001: Invalid setting in Message data word 1-63 of the command.
0x0002: At least one slave reports a warning. Refer to Message data word 163.
0x000A: Failed to execute request. Additional fault information is to be found
in Extended word 7.
0x00FF: Module not initialized (this command is only possible after
END_INIT).
 Message data word 1-63
Byte-array stating the status of the slaves. Array index is equal to slave
address.
0: Slave unaffected
1: Slave started
2: Warning - Slave could not be started because it is not part of the
configuration
ProSoft Technology, Inc.
July 8, 2011
Page 103 of 225