Download MVI69-PDPMV1 User Manual

MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform
PROFIBUS DPV1 Master
Diagnostics and Troubleshooting
User Manual
5.1.3 Viewing the Fieldbus Data from the MVI69-PDPMV1’s
Configuration/Debug Menu
Note: For this procedure, you must connect a serial cable from the serial port on your PC to the
RJ45 to DB9M adaptor cable on the MVI69-PDPMV1 module. If your 1769 processor is equipped
with a built-in Ethernet port, such as the L32E or L35E processors, you may make a diagnostic
connection to the module using CIPconnect.
1
2
3
4
In ProSoft Configuration Builder, select the MVI69-PDPMV1 module, then
click the right mouse button to open a shortcut menu.
On the shortcut menu, choose DIAGNOSTICS. This action opens the
Diagnostics dialog box.
Press [?] to display the Main menu, and then press [2] to view Fieldbus data.
Note the value in Operation State. If the Master and the slave are
communicating correctly, the operation state will be C0 (hex).
ProSoft Technology, Inc.
July 8, 2011
Page 137 of 225