Download RERC Report - Biomedical Engineering
Transcript
Since we had several design changes during the course of the semester we did not use all of the parts that we ordered. In addition, some of our budget went to developing a test set-up that could be used to evaluate the implant without being able to implant it. Table 7 below summarizes the cost of parts that were directly used to make the device. The total cost to build the device was $1129.40. Cost to Build Implantable Device MODEL/PART NUMBER COMPONENT Micro Pump Tygon Tubin (3/32") Thin Cell Battery CuTouch CB220 Stretch Sensor 4 inch Power Supply Parts BlueTooth Check Valve Reduction Coupler PCB Board M100-S Misc. Parts NA QUANTITY 2 57361 ITEM COST NA SHIPPING COSTS NA TOTAL COST $196.49 PL-052025 U06003 U01002 10 4 1 1 $0.80 $5.95 $402.00 $34.00 $5.80 $7.83 $10.00 $13.80 $31.63 $412.00 $34.00 strx-4 1 $10.95 $12.50 $23.45 2 2 2 2 $32.48 $69.00 $4.50 $0.27 $156.39 $22.62 $13.49 $9.88 $32.48 $160.62 $17.99 $10.69 $156.39 NA eb505 cvp-02-01 64267 NA $39.86 $39.86 Total: Table 7. $1,129.40