Download 0300288-06 rev A.0 Software User`s Guide

Chapter 3: Using the WebPort Interface
3-251
2. View the following options:

Connection Status. Identifies WebPort Connects status:
-
OFFLINE. The registered WebPort is not connected to
the cloud. This is the default status when the WebPort is
not connected to the VPN. If you see this status
repeatedly when trying to connect to the cloud, it is
likely that the WebPort has an error. Check the
operational status of the device by viewing the Error
Log. You may also check to see if you see an ERROR
status flash briefly when trying to connect.
-
WAKING UP. The registered WebPort has started
talking to the web server for a connection, but the VPN
connection has not been established yet.
-
ONLINE. Your registered WebPort has established a
VPN connection to the cloud and is ready.
-
CONNECTING. A connection has been requested by a
client but not established yet.
-
CONNECTED. Once a client connects from a personal
computer, the status changes to CONNECTED.
-
SMS SENT. For a cell-enabled WebPort, an SMS
requesting connection has been sent.
-
DISCONNECTING. When the WebPort Connects
service requests to disconnect, this state tells the
WebPort to disconnect.
-
PENDING REGISTRATION. The WebPort is
connected but not registered.
-
NOT REGISTERED. The WebPort is not registered
with the Connects service and is offline.
-
CONNECTION ERROR. This indicates that an error
occurred when trying to get the status from the server.

IP Address. Lists WebPort VPN IP Address (different from
WAN and LAN IP address.

Bytes Sent. Lists number of bytes transmitted to the cloud.

Bytes Received. Lists number of bytes received from the cloud.

Connection Time. Lists how long the WebPort has been online
to the cloud.
Section 3.40 Viewing Actions
Actions are user-defined action(s). For example, you can set up an action that lets
you know an alarm has been triggered on a WebPort (for example, the storage is
full), or a PLC (for example, temperature setting is too high). You may, for
example, attach an action such as 'send an email', to an alarm so that you can find
out when the alarm occurs. You can deliver one or more actions via email, SMS,
or FTP, to one or more recipients. You may also add reports to the associated
User’s Manual Pub. 0300288-06 Rev. A