Download SImplIcIty+ - Handicare AS
Transcript
Track assembly Track assembly Before beginning the installation please ensure that the track is the required length. Refer to Appendix 5 for details. Items required:Tools required: • Fit kit • 2.5mm Allen key Splice bars x 3 • 3mm Allen key Track ends cap x 1 • 6mm Allen key Red bag • 13mm Spanner 8 x bolts • Hacksaw 4 x grub screws • Tin snips Final limit stops x 1 End stops x 1 Mounting feet x 3 • Top track section x 1 • Bottom track section x 1 1Position the bottom section of the track (2m) on the stairs with the splice holes at the top (Figure 1). Regardless of the hand of the lift the rack should always be on the left hand side of the track when looking up the stairs. 2Bolt in the splice bars to the bottom section of track extrusion (Figure 2) using 2 grub screws for the top splice bar and the 4 bolts in the bottom splice bars (from the red fittings bag). Figure 1 Figure 2 Figure 3 MINIVATOR SIMPLICITY+ INSTALLATION MANUAL 3