1
Download CNC PILOT 4290
Transcript
”Dimensions of lateral surface” soft key Cartesian or polar dimensions The ”linear dimension CY” is given with respect to the unrolled surface under ”reference diameter.” Polar dimensions Milling depth For figures, enter the parameter ”Depth P.” If you use individual elements for describing a milling contour, TURN PLUS opens the ”Pocket/contour” dialog box after you have finished your entries, which requests ”Depth P.” Angle or angle as linear dimension ”Depth P” > 0 defines a pocket. Polar dimension (parameter ”P”): n ”P” is given with respect to the unrolled lateral surface. ■ Select the desired solution when there are two possibilities. Position of lateral-surface contours TURN PLUS takes the selected reference plane and suggests it as reference diameter. ”Reference data” dialog box X: Reference diameter Starting point of lateral surface contour To define the starting point, select Contour. Parameters Z: Starting point of contour P: Starting point of contour – polar CY: Starting point of contour – angle as linear dimension C: Starting point of contour – angle HEIDENHAIN CNC PILOT 4290 249 6.6 C-Axis Contours 6.6.2 Contours of the Lateral Surface
