Download CNC PILOT 4290
Transcript
8.1 Tool Database Drilling tool parameters Parameters of dialog box 1 G S TP ID: Identification number of tool • • • X, Z, Y dim. (xe, ze, ye): Setting dimensions • – – Diamet. (db): Drill diameter • • • Bor.ang. (bw): Drill angle • • • Point angleW (sw): Point angle • • • Shnk.di. (d1): Shank diameter • • • Shnk.ln. (l1): Shank length • • • Pos.ang. (rw): Position angle • • – X, Z, Y comp. (DX, DZ, DY): Compensation values (maximum value +/– 10 mm) • – – Direc.rot.: Direction of spindle rotation • – • Usab.lg.(nl): Usable length of drill – – • Type of tap: See fixed-word list *1 – *1 Strtlen (al): Length of first cut • • • Fixed-word list for ”Tap type”: ■ 0: Undefined ■ 11: Metric ■ 12: Fine thread ■ 13: Whitworth thread ■ 14: Pipe thread ■ 15: UNC ■ 16: UNF ■ 17: PG ■ 18: NPT ■ 19: Tetragonal thread ■ 20: Other threads Example: Tool type 311 *1:The ”Type of tap” parameter is used for determining the thread parameters; the AWG accounts for this parameter when selecting a tool. Continued HEIDENHAIN CNC PILOT 4290 379
Related documents
CNC Pilot 4290
User manual
smart.Turn MANUALplus 620 / CNC PILOT 640
CNC Pilot 4290
354 100-22 - heidenhain
Oregon Scientific EW96 Clock User Manual
Robur Line F1 Series Specifications
XC100 Series Monitor & XT300 Series Dehydrator User Manual
D GB # 26 4251
1.0 Introduction - Case Western Reserve University
354 267-24 - heidenhain
Electronic sourcing system