Download CNC PILOT 4290

Transcript
8.1 Tool Database
Drilling tool parameters
Parameters of dialog box 1
G
S
TP
ID: Identification number of tool
•
•
•
X, Z, Y dim. (xe, ze, ye): Setting dimensions
•
–
–
Diamet. (db): Drill diameter
•
•
•
Bor.ang. (bw): Drill angle
•
•
•
Point angleW (sw): Point angle
•
•
•
Shnk.di. (d1): Shank diameter
•
•
•
Shnk.ln. (l1): Shank length
•
•
•
Pos.ang. (rw): Position angle
•
•
–
X, Z, Y comp. (DX, DZ, DY): Compensation values
(maximum value +/– 10 mm)
•
–
–
Direc.rot.: Direction of spindle rotation
•
–
•
Usab.lg.(nl): Usable length of drill
–
–
•
Type of tap: See fixed-word list
*1
–
*1
Strtlen (al): Length of first cut
•
•
•
Fixed-word list for ”Tap type”:
■ 0: Undefined
■ 11: Metric
■ 12: Fine thread
■ 13: Whitworth thread
■ 14: Pipe thread
■ 15: UNC
■ 16: UNF
■ 17: PG
■ 18: NPT
■ 19: Tetragonal thread
■ 20: Other threads
Example: Tool type 311
*1:The ”Type of tap” parameter is used for determining the thread
parameters; the AWG accounts for this parameter when selecting a
tool.
Continued
HEIDENHAIN CNC PILOT 4290
379