Download Untitled

Transcript
Relay Status
The Relay Status screen displays the setup status of the Relays. In order to access the page:
Open the screen by selecting Multi-IO

The Relay Status Screen displays the setup status of the relays:
Relay Status:
Definition of the Relay configuration:
Relay 1
Configured to Auto Mode, signaled on Events, using 0->1->0 as the Signal
Type for a Duration of 100ms. Relay signal is synchronized to Begin at the
time the Condition Ends.
SEE ALSO:

About Monitoring And Setting Up your IO Ports

Digital In Setup

Digital In Status

Relay Setup

Event Signal

Energy Signal

Alarm Signal
321